The KL-92 is a pressure transducer suitable for use in monitoring pressure of various high-purity and corrosive / aggressive fluids. The superior design provides for minimal “dead volume” which reduces the potential for contamination of the measured fluid / process. The KL-92 is available in two construction types: inline or insertion. The body construction meets IP-54 requirements.
• ± 1 % full-scale accuracy• All PFA/PTFE wetted part construction• No 'O'-ring seals or fill fluids• Choice of end fitting: Flare, Pillar, 20S, MNPT, or Tube
Material of Wetted Parts:
PFA / PTFE
Pressure Range:
0 to 50 psi, 0 to 75 psi
Allowable Maximum Pressure:
120 psi
Temperature Coefficient:
+/- 0.05 % F.S. / deg. C
Power and Supply Current:
12-24 VDC * +/-10% ( 30 mA DC max. )
Analog Output:
Voltage Output:
0 to 10, 0 to 5, 1 to 5 VDC
Current Output:
4 to 20 mA ( 500 ohm max at 24 VDC )
Output Accuracy:
+/- 1 % F.S.
Response Time
Within 5 ms
Connection Type:
Flaretek, Super Pillar 300, Tube Ends, MNPT
Connection Sizes:
1/4” , 3/8” , 1/2” , 3/4”
Operating Temperature Range:
10 to 80°C
Operating Humidity Range:
35 to 85 % RH ( non-condensing )
Protection:
IP-54 ( Splash Proof )
Cable Length:
2 m
Weight:
140 g ( with cable )
For additional specification details, please refer to the product data sheet located in the documentation tab of this web page.
