The KL95 is a “flow through” pressure transducer suitable for use in monitoring pressure of various high-purity and corrosive / aggressive fluids. The “flow through” design provides for minimal “dead volume” which reduces the potential for contamination of the measured fluid / process. The KL95 is provided with an integrally mounted local LED display and is available in two standard pressure ranges.
• 1% full-scale accuracy• Local LED Display• Capable of measuring gauge pressure• All PFA wetted part construction• No o-ring seals or fluids fill• Choice of end fittings: tube, flare, or Pillar
Material of Wetted Parts
PFA / PTFE
Material of Case
Body
Display Case
Polypropylen, PET
Pressure Range (Max Display Value)
0 to 50 psi (50.0), 0 to 75 psi (75.0)
Allowable Maximum Pressure
105 psi
Display (LED 4 Digits)
Accuracy
±1% F.S. ±1 digit
Rate
0.2 seconds
Temperature Coefficient
+/- 0.05 % F.S. / deg. C
Power and Supply Current
24VDC ±10% (30mA DC max.)
Comparator Output
Open Collector
2 outputs of type NPN (30VDC, 10mA max)
Response Time
Within 5ms
Analog Output
Voltage Output
0 to 10VDC
Current Output
4 to 20mA
Output Accuracy
+/- 1 % F.S.
Within 50 ms
Connection Type
Flaretek, Super Pillar 300, Tube Ends
Connection Sizes
1/4” , 3/8” , 1/2” , 3/4”
Operating Temperature Range
10 to 60°C
Operating Humidity Range
35 to 85 % RH ( non-condensing )
Protection
IP-54 (an atmosphere release hole exists)
Cable Length
4 m
Weight
280 g
For additional specification details, please refer to the product data sheet located in the documentation tab of this web page.
